Tub & Tile
Tub & Tile is a quality siliconized acrylic adhesive caulk for sinks, tubs, showers, and counter tops. Forms a watertight, mildew-resistant seal. Meets ASTM C-834. 40-year guarantee.
Colors:
TUB & TILE is a quality siliconized acrylic adhesive caulk. It can be used on a wide variety of interior and exterior surfaces, delivering good adhesion and durability. TUB & TILE caulk forms a flexible, durable, airtight, water resistant seal that offers protection from environmental conditions and features an easy to clean bead. Once cured, TUB & TILE caulk is mildew resistant and meets ASTM C-834. TUB & TILE caulk is designed to be used where an acrylic adhesive sealant is ideal for sealing or setting the following: Sinks, Showers, Counter Tops, and similar applications. TUB & TILE caulk is easily cleaned with soap and water.
- 1:Meets ASTM C-834, Type OP, Grade -18ºC.
- 2:Up to 1/2” in properly designed joints
- 3:Paintable
- 4:Cured bead is mildew resistant
- 5:Provides a watertight seal
- 6:Interior / Exterior
- 7:40-year guarantee
- Sinks
- Tubs
- Showers Counter Tops
- Counter
- Tops
- Masonry
- Ceramic Tile
- Marble
- Concrete
- Brick
- Glass
- Wood
- Metal
- Porcelain
Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint, old caulk or other contaminates. Areas with existing mold or mildew should first be cleaned with a mild bleach solution. Only apply when sealant, surface, and air temperature are above 40ºF and rising. Do not apply on surfaces that exceed 120ºF, or when rain is expected.
- Cut nozzle at a 45º angle. Cured bead should be between 1/8” and 1/2” wide. Use a foam backer rod for joints that exceed 1/2” in depth.
- Smooth bead with a moistened cloth.
- Clean up uncured material and tools with soap and water.
- Allow 4 to 6 hours before painting. Coverage 10.1 fl oz.: 55 linear feet for a 3/16” bead.
TEST PAINT FOR COMPATIBILITY. NOT INTENDED FOR AREAS THAT WILL BE SUBMERGED IN WATER. DO NOT USE ON MIRRORS. KEEP FROM FREEZING. NOT FOR FOOD CONTACT SURFACES.
Immediately after use, clean uncured material and tools with soap and water. Remove cured sealant by cutting with a sharp-edged tool.
- Vehicle: Acrylic Polymer / Siliconized
- VOC: Non-chemically curing sealant. VOC (less exempt solvents) is <1.5%
- Pigment: Calcium Carbonate
- Solids: Approximately 72.5%
- Weight per Gallon: 11.0 ± 0.5
- Service Temp: 0ºF to 160ºF
- Temp Application Range: 40ºF and rising. Air temp no hotter than 95º and substrate not hotter than 120º
- Freeze Thaw Stability: Passes 5 Cycles@ 0ºF (1 cycle = 16hrs. @ 0ºF, 8hrs at 75ºF)
- Flash Point: None
- Consistency: 10 to 40 G/S @ 75ºF (SEMCO gun at 50psi)
- Applications: Interior / Exterior
- Life Expectancy: 40-year performance
- Shelf Life: 24 months when stored at 50ºF to 80ºF
- Coverage: 10.1 fl oz: 55 linear ft. at a 3/16" bead
- Odor: Mild Sweet Acrylic
- Tooling Time: 10 to 15 Minutes
- Tack Free Time: 60 Minutes
- Paint Over Time: 24 hours
- Cure Time Before Use: 24 hours
- Full Cure: 7-14 Days
