Tub & Tile
Tub & Tile is a quality siliconized acrylic adhesive caulk for sinks, tubs, showers, and counter tops. Forms a watertight, mildew-resistant seal. Meets ASTM C-834. 40-year guarantee.
Colors:
TUB & TILE is a quality siliconized acrylic adhesive caulk. It can be used on a wide variety of interior and exterior surfaces, delivering good adhesion and durability. TUB & TILE caulk forms a flexible, durable, airtight, water resistant seal that offers protection from environmental conditions and features an easy to clean bead. Once cured, TUB & TILE caulk is mildew resistant and meets ASTM C-834. TUB & TILE caulk is designed to be used where an acrylic adhesive sealant is ideal for sealing or setting the following: Sinks, Showers, Counter Tops, and similar applications. TUB & TILE caulk is easily cleaned with soap and water.
- 1:Meets ASTM C-834, Type OP, Grade -18ºC.
- 2:Up to 1/2” in properly designed joints
- 3:Paintable
- 4:Cured bead is mildew resistant
- 5:Provides a watertight seal
- 6:Interior / Exterior
- 7:40-year guarantee
- Sinks
- Tubs
- Showers Counter Tops
- Counter
- Tops
- Masonry
- Ceramic Tile
- Marble
- Concrete
- Brick
- Glass
- Wood
- Metal
- Porcelain
Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint, old caulk or other contaminates. Areas with existing mold or mildew should first be cleaned with a mild bleach solution. Only apply when sealant, surface, and air temperature are above 40ºF and rising. Do not apply on surfaces that exceed 120ºF, or when rain is expected.
- Cut nozzle at a 45º angle. Cured bead should be between 1/8” and 1/2” wide. Use a foam backer rod for joints that exceed 1/2” in depth.
- Smooth bead with a moistened cloth.
- Clean up uncured material and tools with soap and water.
- Allow 4 to 6 hours before painting. Coverage 10.1 fl oz.: 55 linear feet for a 3/16” bead.
TEST PAINT FOR COMPATIBILITY. NOT INTENDED FOR AREAS THAT WILL BE SUBMERGED IN WATER. DO NOT USE ON MIRRORS. KEEP FROM FREEZING. NOT FOR FOOD CONTACT SURFACES.
Immediately after use, clean uncured material and tools with soap and water. Remove cured sealant by cutting with a sharp-edged tool.
- Vehicle: Acrylic Polymer / Siliconized
- VOC: Non-chemically curing sealant. VOC (less exempt solvents) is <1.5%
- Pigment: Calcium Carbonate
- Solids: Approximately 72.5%
- Weight per Gallon: 11.0 ± 0.5
- Service Temp: 0ºF to 160ºF
- Temp Application Range: 40ºF and rising. Air temp no hotter than 95º and substrate not hotter than 120º
- Freeze Thaw Stability: Passes 5 Cycles@ 0ºF (1 cycle = 16hrs. @ 0ºF, 8hrs at 75ºF)
- Flash Point: None
- Consistency: 10 to 40 G/S @ 75ºF (SEMCO gun at 50psi)
- Applications: Interior / Exterior
- Life Expectancy: 40-year performance
- Shelf Life: 24 months when stored at 50ºF to 80ºF
- Coverage: 10.1 fl oz: 55 linear ft. at a 3/16" bead
- Odor: Mild Sweet Acrylic
- Tooling Time: 10 to 15 Minutes
- Tack Free Time: 60 Minutes
- Paint Over Time: 24 hours
- Cure Time Before Use: 24 hours
- Full Cure: 7-14 Days
Tub & Tile Frequently Asked Questions
What's the difference between White and Clear Tub & Tile?
White contains a calcium carbonate pigment (about 72.5% solids, 11.0 ± 0.5 lbs/gallon) and meets ASTM C-834 Type OP, Grade -18°C. Clear has no pigment (about 60% solids, 8.90 ± 0.5 lbs/gallon) and meets ASTM C-834 Type C, Grade 0°C — it guns out white but dries clear. Application, coverage, and packaging sizes are the same for both.
Can Tub & Tile be used on mirrors?
No — the manufacturer specifically instructs not to use it on mirrors.
How long before I can paint over Tub & Tile?
The product specifications list a 24-hour paint-over time, but the application instructions separately say to allow 4 to 6 hours before painting — those two figures don't fully agree. The TDS also notes to test paint for compatibility first, so it's worth confirming timing with Tower Sealants before painting over it.
Is Tub & Tile safe for wet areas like showers?
Yes — it's designed for sinks, tubs, showers, and countertops and forms a watertight, mildew-resistant seal once cured. It's not intended, though, for areas that will be fully submerged in water.
How do I deal with existing mold or mildew before applying?
Clean the area first with a mild bleach solution, then make sure the surface is fully dry and free of dirt, dust, oil, and old caulk before applying.
What temperature can Tub & Tile be applied in?
Apply when sealant, surface, and air temperature are above 40°F and rising, with air no hotter than 95°F and substrate no hotter than 120°F. Once cured, it holds up across a 0°F to 160°F service temperature range.
What substrates does Tub & Tile work on?
Masonry, ceramic tile, marble, concrete, brick, glass, wood, metal, and porcelain.
Can Tub & Tile be used in submerged or food-contact areas?
No. It's not intended for areas that will be submerged in water or for food contact surfaces, and it should be kept from freezing before use.
What warranty does Tub & Tile come with?
A 40-year guarantee. If the product cracks, peels, or separates within 40 years of installation after proper storage and application, Tower Sealants will replace it when the purchaser returns proof of purchase.
Technical Data Sheet
Tub & Tile
Siliconized Acrylic Caulk — White & Clear
Description
Tub & Tile is a quality siliconized acrylic adhesive caulk. It can be used on a wide variety of interior and exterior surfaces, delivering good adhesion and durability. Tub & Tile caulk forms a flexible, durable, airtight, water resistant seal that offers protection from environmental conditions and features an easy to clean bead. Once cured, it is mildew resistant and meets ASTM C-834. It's designed for sealing or setting sinks, showers, counter tops, and similar applications, and cleans up easily with soap and water. It's available in White and a Clear formula that guns out white and dries clear.
Performance Features
- Meets ASTM C-834 (White: Type OP, Grade -18°C · Clear: Type C, Grade 0°C)
- Up to 1/2" in properly designed joints
- Paintable
- Cured bead is mildew resistant
- Provides a watertight seal
- Interior / Exterior
- 40-year guarantee
Product Specifications
- Vehicle
- Acrylic Polymer / Siliconized
- VOC
- Non-chemically curing sealant. <1.5% less exempt solvents
- Pigment
- White: Calcium Carbonate · Clear: N/A
- Solids
- White: approximately 72.5% · Clear: approximately 60%
- Weight per Gallon
- White: 11.0 ± 0.5 · Clear: 8.90 ± 0.5
- Service Temp
- 0°F to 160°F
- Application Temp Range
- 40°F and rising. Air no hotter than 95°F, substrate no hotter than 120°F
- Freeze-Thaw Stability
- Passes 5 cycles @ 0°F (1 cycle = 16 hrs @ 0°F, 8 hrs @ 75°F)
- Flash Point
- None
- Consistency
- 10 to 40 G/S @ 75°F (SEMCO gun at 50 psi)
- Applications
- Interior / Exterior
- Life Expectancy
- 40-year performance
- Shelf Life
- 24 months when stored at 50°F to 80°F
- Coverage
- 10.1 fl oz: 55 linear ft. at a 3/16" bead
- Odor
- Mild sweet acrylic
- Tooling Time
- 10 to 15 minutes
- Tack-Free Time
- 60 minutes
- Paint Over Time
- 24 hours*
- Cure Time Before Use
- 24 hours
- Full Cure
- 7 to 14 days
*See the note under Application below — the step-by-step instructions separately say to allow 4 to 6 hours before painting, which doesn't match this 24-hour figure.
Packaging
- Item · UPC
- TS-00515 · 843034005159
- Item · UPC
- TS-00525 · 843034005258
- Item · UPC
- TS-00535 · 843034005357
- Item · UPC
- TS-00545 · 843034005456
Applications
- Sinks
- Tubs
- Showers
- Counter tops
Substrates
- Masonry
- Concrete
- Wood
- Ceramic tile
- Brick
- Metal
- Marble
- Glass
- Porcelain
Surface Preparation
Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint, old caulk, or other contaminants. Areas with existing mold or mildew should first be cleaned with a mild bleach solution. Only apply when sealant, surface, and air temperature are above 40°F and rising. Do not apply on surfaces that exceed 120°F, or when rain is expected.
Application
- Cut nozzle at a 45° angle. Cured bead should be between 1/8″ and 1/2″ wide. Use a foam backer rod for joints that exceed 1/2″ in depth. (Clear variant guns white, dries clear.)
- Smooth bead with a moistened cloth.
- Clean up uncured material and tools with soap and water.
- Allow 4 to 6 hours before painting.
Coverage: 55 linear feet for a 3/16″ bead from a 10.1 fl oz tube.
Test paint for compatibility. Not intended for areas that will be submerged in water. Do not use on mirrors. Keep from freezing. Not for food contact surfaces.
Clean-Up
Immediately after use, clean uncured material and tools with soap and water. Remove cured sealant by cutting with a sharp-edged tool.
Safety
Irritating to skin, eyes and respiratory tract. Harmful if swallowed, inhaled or absorbed through the skin. May cause allergic skin reactions and/or central nervous system depression. Adverse reproduction effects have been reported in animals. May cause adverse kidney effects. Avoid contact with eyes, skin and clothing. Use in a well ventilated area. Wear eye, skin, and respiratory protection. Eye contact: immediately flush with water for 15 minutes and get medical attention immediately. If swallowed: do not induce vomiting; give large quantities of water and get medical attention. Never give anything by mouth to an unconscious person. For health information, refer to the Safety Data Sheet or call ChemTrec at 800-424-9300. Keep out of reach of children.
⚠ Cancer and Reproductive Harm — go to www.P65Warnings.ca.gov for additional information.
First Aid
In case of skin contact, wash off quickly with plenty of soap and water and remove contaminated clothing. For eye contact, flush eyes immediately with large quantities of water for at least 15 minutes. If swallowed, obtain medical treatment immediately — do not induce vomiting. If inhalation causes physical discomfort, move to fresh air; if discomfort persists or any breathing difficulty occurs, seek medical help.
Safety Data Sheets (SDS) are available upon request via towersealants.com or by calling 866-897-7568.
Manufacturer
Tower Sealants, Inc. · 2095 Memorial Park Road, Gainesville, GA 30504
Customer Service: 866-897-7568 · Information: tech@towersealants.com · towersealants.com