Ex-Cell
Ex-Cell is a general purpose builder's caulk that delivers good adhesion and durability across windows, trim, doors, ceilings, drywall, and air conditioning vents. Forms a flexible, water-resistant seal. Meets ASTM C-834. 40-year guarantee.
Colors:
EX-CELL Siliconized Latex Caulk is a quality general purpose caulk. This Siliconized latex based caulk can be used on a wide variety of interior and exterior surfaces delivering good adhesion and durability. It forms a flexible, durable, airtight, water resistant seal that offers protection from environmental conditions. Once cured, the bead is mildew resistant. It is low odor, easy to apply and is soap and water cleanup.
- 1:Meets ASTM C-834, Type OP, Grade 0°C.
- 2:Meets ASTM E90-09 for use in acoustical applications when used as described in ASTM C919
- 3:Up to 1/2” in properly designed joints
- 4:Paintable
- 5:Provides a flexible, durable seal
- 6:All purpose
- 7:Interior / Exterior
- 8:Vacuum Filled Tubes
- 9:40-year guarantee
- Windows
- Trim
- Penetrations
- Doors
- Flashings
- Counters
- Siding
- Masonry
- Ceramic Tile
- Wood
- Concrete
- Glass
- Metal
- Brick
Surfaces to be caulked must be dry and free of all dirt, dust, oil, mildew, loose paint, old caulk or other contaminates. Only apply when sealant, surface, and air temperature are above 40ºF and rising. Do not apply on surfaces that exceed 120ºF, or when rain is expected.
- Cut nozzle at a 45º angle. Cured bead should be between 1/8” and 1/2” wide. Use a foam backer rod for joints that exceed 1/2” in depth.
- Smooth bead with a moistened cloth.
- Clean up uncured material and tools with soap and water.
- Allow 4 to 6 hours before painting.
Coverage: 55 linear feet for a 3/16” bead.
NOT INTENDED FOR AREAS THAT WILL BE SUBMERGED IN WATER. KEEP FROM FREEZING. NOT FOR FOOD CONTACT SURFACES.
Immediately after use, clean uncured material and tools with soap and water. Remove cured sealant by cutting with a sharp-edged tool.
- Vehicle: Acrylic Polymer Latex / Siliconized
- VOC: Non-chemically curing sealant. VOC (less exempt solvents) is <1.5%
- Pigment: Calcium Carbonate
- Solids: Approximately 82%
- Weight per Gallon: 13.5 ± 0.5
- Specific Gravity: Approximately 1.62
- Service Temp: -25ºF to 180ºF
- Temp Application Range: 40ºF and rising. Air temp no hotter than 95º and substrate not hotter than 120º
- Freeze Thaw Stability: Passes 5 Cycles@ 0ºF (1 cycle = 16hrs. @ 0ºF, 8hrs at 75ºF)
- Flash Point: None
- Consistency: 15 to 25 G/S @ 75ºF (SEMCO gun at 50psi)
- Applications: Interior / Exterior
- Life Expectancy: 40-year performance
- Shelf Life: 24 months when stored at 50ºF to 80ºF
- Coverage: 10.1 fl oz: 55 linear ft. at a 3/16” bead
- Odor: Mild Sweet Acrylic
- Tooling Time: 5 to 10 Minutes
- Tack Free Time: 45 Minutes
- Paint Over Time: 4 to 6 hours
- Full Cure: 7-14 Days
Product resources
